What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 03.07.2025 00:02
What does a fuse do?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The "F1" Reviews Are In - Dark Horizons
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
At least they know the answer if they wanted it.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
These are simplified answers to the original question, and does not change anything I wrote above.
This device then solves the entire problem.
It also is a device that limits the change in current flow.
Apple’s new iPadOS has given my iPad a new lease of life - Creative Bloq
2024–10–16 [ OO OLAOYE OYEBODE ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Day Two Highlights at Pro Tour Magic: The Gathering®—FINAL FANTASY™ - magic.gg
This one hit behind the barn.
But it can get overloaded, and no longer works.
the problem then depends on "how fast does the fuse operate?".
Practice Report (6/9): Notes from the sideline - New York Giants
[image of Common-mode choke]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then describes Rainy Season and Lightning.
Scientists uncover key role of thyroid hormones in fear memory formation - PsyPost
One is “what exactly is in a ‘surge protector’ ? ”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
so, what happens?
What is the best editor base on AI for developers?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
First Sentence:
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Colorado confirms 3 more infections in airport-linked measles outbreak - CIDRAP
He then asserts :
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At one ohm, the resistor has a maximum of 1 watt power.
Your Apple Watch Is Getting a Neat New Feature That You’ll Actually Use - Gear Patrol
2024–10–14 [Omar Gharbi Omar Gharbi ]
nine
For this case there are devices called Metal oxide varistors (MOV).
One
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The other is “what does a “fuse” do?”
People Are Being Committed After Spiraling Into 'ChatGPT Psychosis' - Slashdot
But… the neutral is now “floating” because of the 1 ohm resistance.
Upvotes:
A fuse is a non-resetable over current circuit protector.
Barnstars:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The bolt then partially travels down the line to your home.
The third is lightning and “how it gets conducted into a home.”
eight
A circuit breaker is similar, but is resettable.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Because the load is inductive, the current lags the voltage.(by a bit).
Edit 2024–10.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is where the MOV conducts again, and dissipated the energy.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
but I think this circuit , shows a few more pieces.
So, the voltage could go up to 500 volts, and the fuse will not open up.
2024–10–10[John johnson John Johnson ]
It seems Mohan does not understand the difference between a comment and an Answer.
Here is a simplified AC power diagram.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is 'the assistant's answer'
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
In schematic diagrams this is the symbol for a fuse:
There are three different concepts here that are getting confused.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then describes the function of a fuse.
What is lightning?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
[old diagram got deleted by accident]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
An AC voltage/ current source, and an ac inductive load.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
There are two important concepts here.
I post the exact comment here.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The MOV will conduct when the voltage exceeds 50% of line voltage.
what exactly is a ‘surge’ protector?
(Dc diagram shown, AC is similar).
but this device (an Inductor) … impedes the rapid changes in the current.
These devices are installed between the “hot” and “neutral” and protective ground.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
a photo is worth a thousand words.
Now when you have a certain ac resistance, then a current flows in a loop.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.